Frequently Asked Questions

At PROD display, press the P key.

Enter Programming Mode and press the key you want to change. When the colon is steady the timer is in minutes and seconds. When the colon is flashing the timer is in hours and minutes. To change from minutes to hours use the up or down arrows. Minutes go up to 59:59 then will go to hours and the colon will start to flash. You are in hour mode when the colon is flashing. Hours go up to 99:59. Once the time is set, keep pressing the product key until the display reads PROD.

Press and hold the P key for three seconds. All displays will read PROD.

Enter Programming Mode and press the UP arrow key. You have 3 choices. Three is the loudest setting. Once you have selected the volume level, press the P key until PROD is displayed.

Verify that the timer is still plugged in. If it is still plugged in and won’t power up try a different outlet. If the timer still doesn’t power up the timer needs to be replaced.

Press and hold down the copyright symbol (© 2005 or © FAST) for 5 seconds. Display will read PROG.

Enter Programming Mode and press the key you want to change. When the colon is steady the timer is in minutes and seconds. When the colon is flashing the timer is in hours and minutes. To change from minutes to hours use the up or down arrows. Minutes go up to 59:59 then will go to hours and the colon will start to flash. You are in hour mode when the colon is flashing. Hours go up to 99:59. Once the time is set, keep pressing the product key until the display reads PROD.

Press and hold down the copyright symbol (© 2005 or © FAST).

Verify that the timer is still plugged in. If it is still plugged in and won’t power up try a different outlet. If the timer still doesn’t power up the timer needs to be replaced.

Check the fuse located on the side of the timer. If the fuse is blown, replace with a 15 amp 250 volt slow blow fuse.

Press the PROG key. The display will read CODE. Using the number keys, type in 1724 then press ENTER. The display will read PROD.

With PROD on the display, press the key you want to change and then press ENTER. Your current time will be displayed. Press TOGGLE/CLEAR to zero out the time then use the number keys to set a new time then press ENTER until the display reads PROD.

With PROD in the display, press the PROG key.

If the key is not responding, there is a chance you may have a damaged keypad. Try to reset the timer by unplugging and then as you plug the timer back in hold down the TOGGLE/CLEAR key. If the timer is still not responding, it will need to be replaced.

Verify that the controller is still plugged in. If it is still plugged in and won’t power up try a different outlet. If the controller still doesn’t power up the controller needs to be replaced.

Press and hold the “P” for three seconds. Product Cnt will be displayed. Press the down arrow. Programming will be displayed. Press the “P” key. ENTER CODE will be displayed. Type in 1724 then press the “P” key. Display will show Recipe.

With Recipe displayed, press the “P” key. All product LEDs will light up and the display will read Select Product To Program. Press the key you want to change, then press the “P” key. The display will read ALL. Scroll down to Time using the down arrow key. Press the “P” key. Change the current time by using the number keys. Press the “P” key until Time is displayed. Using the arrow keys, scroll until Exit is displayed. Press the “P” key. The display will read Recipe.

With Recipe displayed, scroll down to Exit and press the “P” key.

If the key is not responding, there is a chance you may have a damaged keypad. Try to reset the timer by unplugging and then as you plug the timer back in hold down the TOGGLE/CLEAR key. If the timer is still not responding, it will need to be replaced.

Verify that the controller is still plugged in. If it is still plugged in and won’t power up try a different outlet. If the controller still doesn’t power up the controller needs to be replaced.

Press and hold the “P” for three seconds. COUNTS will be displayed. Press the arrow down key. PROGRAM will be displayed. Press the “P” key. CODE will be displayed.

From ALL being displayed, press the “P” key. TIME will be displayed then the actual time will come up XX:XX. To change the time, press TOGGLE/CLEAR to zero the time out, then type in the new time. Press the “P” key. ALMTIME 1 will be displayed then the actual time will come up XX:XX. To change the time, press TOGGLE CLEAR to zero the time out then type in your new time. Press the “P” key. ALMNAME 1 will be displayed, then the actual name will come up. Using the arrows keys, you can scroll through the library. Then press the “P” key. HOLDTIME will be displayed then the actual time will come up XX:XX. To change the time, press toggle clear to zero the time out, then type in your new time. Press the “P” key. ALL will be displayed.

With Recipe displayed, scroll down to Exit and press the “P” key.

If the key is not responding, there is a chance you may have a damaged keypad. Try to reset the timer by unplugging and then as you plug the timer back in, hold down the TOGGLE/CLEAR key. If the timer is still not working, it will need to be replaced.

Verify that the controller is still plugged in. If it is still plugged in and won’t power up try a different outlet. If the controller still doesn’t power up the controller needs to be replaced.

Press the PROG key. The display will read CODE. Using the number keys type in 1724, then press ENTER. The display will read PROD.

With PROD on the display, press the key you want to change and then press ENTER. Your current time will be displayed. Press TOGGLE/CLEAR to zero out the time then use the number keys to set a new time then press ENTER until the display reads PROD.

With PROD in the display, press the PROG key.

If the key is not responding, there is a chance you may have a damaged keypad. Try to reset the timer by unplugging and then as you plug the timer back in hold down the TOGGLE/CLEAR key. If the timer is still not responding, it will need to be replaced.

Verify that the controller is still plugged in. If it is still plugged in and won’t power up try a different outlet. If the controller still doesn’t power up the controller needs to be replaced.

Press and hold the “P” for three seconds.

From ALL being displayed, press the “P” key. TIME will be displayed then the actual time will come up XX:XX. To change the time, press TOGGLE/CLEAR to zero the time out, then type in the new time. Press the “P” key. ALMTIME 1 will be displayed then the actual time will come up XX:XX. To change the time, press TOGGLE CLEAR to zero the time out then type in your new time. Press the “P” key. ALMNAME 1 will be displayed, then the actual name will come up. Using the arrows keys, you can scroll through the library. Then press the “P” key. HOLDTIME will be displayed then the actual time will come up XX:XX. To change the time, press toggle clear to zero the time out, then type in your new time. Press the “P” key. ALL will be displayed.

With Recipe displayed, scroll down to Exit and press the “P” key.

If the key is not responding, there is a chance you may have a damaged keypad. Try to reset the timer by unplugging and then as you plug the timer back in hold down the TOGGLE/CLEAR key. If the timer is still not responding, it will need to be replaced.

Verify that the computer is still plugged in. If it is still plugged in and won’t power up try a different outlet. If the computer still doesn’t power up the computer needs to be replaced.